Whole House Water Filtration in Comal County

Whole House Water Filtration

A whole-house filter sits where the water enters the home and treats every drop that follows, so the shower, the laundry and the ice maker all get the same water as the kitchen tap. In Comal County that solves a few different complaints. On a city or water-district supply, the most common one is the chlorine taste and smell the utility adds to keep the water safe, which a carbon filter removes. On wells and on older district lines, it is sediment and grit that clog aerators, wear out appliance valves and turn the water cloudy after a pump cycles or a main is worked on. We install whole-house water filtration systems across the county, sized to the home’s flow so the pressure does not drop when two showers and the dishwasher run at once. That means picking the right media and the right housing for your water: a sediment stage, a carbon stage for chlorine and taste, or a backwashing filter for a well that keeps throwing sand. We test first, so the filter you get is the one your water actually needs, and we install it with a bypass so the house is never without water during a cartridge change.

Sediment, chlorine and the order they go in

Filtration works in stages and the order matters. A sediment filter goes first so grit does not foul the carbon or the softener behind it. Carbon follows to pull chlorine, taste and odor. A softener, if the home has one, comes after that so its resin stays clean. For wells with heavy sediment, a backwashing filter that cleans itself replaces disposable cartridges that would need changing every few weeks. We lay the train out in the right order so each stage does its job and lasts.

Sized for the whole house, not a sink

A whole-house filter has to pass the full flow of the home without choking it. An undersized housing is the classic cause of weak showers after a filter install. We size by the home’s plumbing and peak demand, use full-flow housings or tanks, and install a bypass and pressure gauges so you can see when a cartridge is loading up and change it before the pressure drops.

What’s included

• Water tested so the filter media matches the actual problem
• Sediment and carbon stages sized to the home’s full flow
• Backwashing filters for wells with ongoing sediment
• Installed at the point of entry with a bypass and gauges
• Cartridge schedule explained, or self-cleaning media where it fits
• Works alongside a softener or RO unit, in the right order